Maxx Model CNC Aluminum Hopup Chamber M4G – M4 AEG (2024 Version)

Maxx Model CNC Aluminum Hopup Chamber M4G – M4 AEG (2024 Version)

From MAXX Model we have the CNC Aluminum Hop-up Chamber M4G. This unit is precisely machined to perform accurately and consistently on Tokyo Marui / VFC M4/M16 AEG series. 

The Hop-up Chamber M4E unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, precision Hopup Lever and bucking Nubs to perform the BB shooting accurately and consistently on every single shot. The Hop-up Chamber M4G unit is equipped with an interchangeable Inlet Adaptor to ensure the hop-up unit is inserted exactly in the center of the inner bore AEG Gearbox nozzle outlet without wobbling. Also mounted are the removable CNC Brass Side Wings to allow the hop to slide smoothly into the outer barrel slots, and included is an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting. More than that, the Hopup Chamber M4G unit is specially designed with a new BB Latching System to prevent BB dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber.

Specification

Compatible with Standard M4 Replicas based on Tokyo Marui / VFC AR AEGs or Clones which share the same specification

Uses Maple Leaf Wonder & Super GBB hop-up bucking

Compatible with other GBB rubbers but this requires cutting the centering fin with a cutter.

*Please note that this chamber is not compatible with standard AEG Buckings, you will need both a GBB Bucking and GBB inner barrel to make it work on your M4 AEG*

What’s in the Box?

CNC Aluminum Hop-up Chamber M4G

CNC Aluminum Soft Round Nub and Spring

CNC Aluminum Soft Flat Nub and Spring

CNC Aluminum Hard Concave Nub and Spring

Steel Upper Compression Spring

Steel Center (Barrel) Compression Spring

Brass Barrel Spacer

Shim Set

O-Ring Set

Warning: Your FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!