0 items 0
Mancraft CNC AR15 Tactical receiver and handguard set - Tan Brown

Mancraft CNC AR15 Tactical receiver and handguard set – Tan Brown

£59999 - Or £20000 / month with Klarna * estimate

By clicking "Add to Basket" you are confirming you are over 18.
Categories: , , , , , , , Tags: , , , , Product ID: 151117

Description

Mancraft CNC AR15 Tactical receiver and handguard set – Tan Brown

Mancraft CNC AR15 Tactical receiver and handguard set – Tan Brown

If you want a visually consistent AR build with zero compromises in quality, this set delivers the moment you take it out of the box. You get our proven Mancraft CNC M4 Tactical Body and the V4 10″ M-LOK handguard — both finished in a perfectly matched, satin-matte Tan Brown, ready for modern AEG V2 and HPA builds in TM spec (ASG).

    Key features

     

Perfectly matched Tan Brown on both receiver and handguard — a clean, “factory matched” look across the entire front end

  • Satin-matte finish (bead-blasted) – an elegant, “soft touch” surface that looks great in photos and in real life.
  • Solid billet CNC – receiver machined from a monolithic 7075-T6 aluminum block: rigidity, stability, and excellent fitment.
  • Tactical/Billet design – aggressive lines, multi-level machining, and weight-relief pockets (perfect for CQB/speedsoft/milsim).
  • Full-length AR top rail – optics and accessories with no hassle.
  • V4 M-LOK 10″ handguard – a modern, lightweight, well-ventilated front end with long windows for accessory mounting.
  • Details – selector markings (SAFE/FIRE/AUTO), a modern dust cover, and the Mancraft Arms logo on the lower.
  • Real weight reduction – the complete receiver with accessories weighs only 646 g.
  • Elegant wooden packaging – the set looks as good as it performs.
  • Covered by Mancraft LIFETIME WARRANTY – build with confidence.
  • Made 100% in Poland, from our original in-house design.

  

Package contents

   

  • Elegant wooden box.
  • Upper + lower receiver set (Mancraft CNC M4 Tactical Body) in Tan Brown.
  • Mancraft V4 M-LOK handguard in Tan Brown.
  • CNC-machined front and rear pins.
  • Middle pin for the gearbox.
  • Ambidextrous fire selector plug.
  • Stock adapter.
  • Dust cover – pre-installed with spring.
  • Additional screw-in detent pin with ball for configuring dust-cover opening via the charging handle.
  • Handguard mounting hardware (clamp screws and barrel nut).

  

Compatibility & notes

  

  • Intended only for airsoft replicas (ASG) in the M4/AR15 platform — AEG and HPA, TM spec.
  • A perfect base for lightweight AEG (V2) builds and HPA conversions (rigidity and fitment help with consistency).
  • When mixing parts from different manufacturers (HU chamber, trigger, selector, pins), minor fitting may be required — typical for AR platforms.
  • Our CNC accessories (selector, mag release, bolt catch) are designed for this body and offer the best fit.
  • This is not a firearm part.

  

Specifications

  

  • Type: set for airsoft M4/AR15 replicas (upper + lower + handguard), TM spec
  • Receiver material: CNC-machined 7075-T6 aluminum
  • Finish: Tan Brown anodizing, matte/satin (bead-blasted)
  • Front system: M-LOK (V4 handguard), AR/Picatinny top rail
  • Visual features: machined undercuts, weight-relief pockets, billet/tactical styling, engraving/logo
  • Set weight with accessories: 646 g

  

Installation (professional service recommended)

  

  • Upper: assemble the inner barrel + bucking + hop-up chamber and slide it into the upper.
  • Front end: install the outer barrel, then the barrel nut/mount, and finally the V4 M-LOK handguard (tighten evenly).
  • Lower: install a V2 gearbox (AEG) or a V2 HPA engine/HPA gearbox, then set up the trigger/selector.
  • Join: mate the upper and lower and insert the pins (front → rear).

  

Connections

  

  • AEG: route the wires so nothing gets pinched.
  • HPA: route the line so it isn’t kinked.
  • Test: dry test first, then test with BBs — finish by setting the hop-up.

  

Tip: if something doesn’t go in smoothly, don’t force it — check hop-up alignment, wire/line routing, and front-end alignment.

  

Why choose this set?

   

  • Because it’s the fastest way to build a visually and technically consistent AR setup: billet CNC 7075-T6, refined details, and perfectly matched Tan Brown on both the receiver and handguard. If you’re building for CQB / milsim, or you want a rigid base for HPA — check availability and add it to your cart.
  • Because it’s made from start to finish in Poland / EU, based on our original in-house design.
  • Because we give you a level of warranty you won’t get anywhere else — buy once and enjoy years of peace of mind.
  • If you want a truly unique build that stands out from the crowd of “cheap, store-bought” builds,

  

FAQ

  

Will this set fit a V2 gearbox?

Yes — it’s an M4/AR15 platform (TM spec), most commonly used in V2 builds (AEG/HPA). With non-standard parts, minor fitting may be required.

  

Is the color perfectly matched between parts?

Yes — the receiver and handguard are anodized using the same finishing concept to achieve a consistent Tan Brown.

  

Is it a good choice for HPA?

Yes — CNC rigidity and fitment make it a very strong base for HPA conversions and consistent setups.

  

Can I mount accessories on the front end?

Yes — the V4 handguard features M-LOK and a top rail for optics/accessories.

    

  •  
     

Related products